Boilers

- Optional Advanced Features Module that provides indoor/outdoor reset, DHW priority, stage firing and more

- Dedicated water-only oil boiler

- Flexible direct or chimney venting - no power assisted fan needed

- Reversible swing-away burner door

- Three-pass cast iron heat exchanger with captured elastomer seals

- Energy Star Rating

- Energy Star Rating

- Quick open top and swing-away burner door with full chamber access increases visibility for inspection and servicing

- Two flue outlets- rear and top - for complete venting flexibility

- Dedicated water-only oil boiler with cast iron section - no tankless heater or cover plate

- Recessed target wall design protects unit from flue brushes

- Includes factory-wired circulator, service switch and Weil-McLain exclusive captured elastomer seals for added reliability

- High capacity/high efficiency tankless heater

- Quick open top and swing-away burner door with full chamber access increases visibility for inspection and servicing

- Includes factory-wired circulator, service switch and Weil-McLain exclusive captured elastomer seals for added reliability

- Recessed target wall design protects unit from flue brushes

- Two flue outlets- rear and top - for complete venting flexibility

- Oil-fired water boiler with cast iron sections

- Energy Star Rating

- Available assembled or as a knockdown for installation areas with limited space

- Oil-fired steam boiler with cast iron sections and tankless heater opening

- Has large water content for longer steaming times

- Two flue outlets- rear and top - for complete venting flexibility

- Includes factory-wired circulator, service switch and Weil-McLain exclusive captured elastomer seals for added reliability

- Quick open top and swing-away burner door with full chamber access increase visibility for inspection and servicing

- Recessed target wall design protects unit from flue brushes

Key Features:

• 86% AFUE Energy Star Certified
• New Unique 3-pass Design
• High Corrosion Resistance
• Tankless Heater Available
• Superior Steam Quality

The V8 oil-fired boiler is designed for quiet operation while providing years of reliable and efficient service.

Some of the many features includes:

• simpler access to the boiler components
• easy access reset button
• no-tools-required burner cover removal and burner wiring disconnect
• knobs replace screws for easy removal of the cover and the burner reset button is now located outside the cover for convenient reset access
• all available burners-Beckett, Carlin and Reillo-now come equipped with a plug and cord arrangement for easy service and attachment of the burnera new fresh air kit allows for optional sealed combustion if desired
• the burner swing door with the articulating hinge now uses a stud and nut arrangement with a notched door for easier alignment, ensuring a tight seal

As always, the jacket design and burner enclosure give the V8 a modern, finished appearance, and it is available in multiple heating capacities that can be configured for water or steam - with or without a tankless hot water heating coil. As one of the most versatile boilers available, the V8 is intended for installation in a wide variety of home styles and sizes.

Key Features :

Double Articulating Swing Door
Energy Star Compliant
Iso-Quiet Burner
Multiple Firing Rates
Natural Draft
Oil-Fired
Water or Steam
Cast-Iron Sectional Design
70 To 298 MBH Capacity

Versatility is defined by Burnham's C3 & C4 residential oil boilers. Available as a packaged unit, the C3 & C4 offer the configuration you need for any hot water application. The pinned heating surfaces of the C3 & C4's cast-iron sections, along with a vertical flue design, extract maximum heat while minimizing draft losses. The result is a highly efficient unit applicable to the widest variety of oil installations.

Key Features :

* Natural Draft
* Oil-Fired
* Water Only
* Cast-Iron Sectional Design
* 89 To 140 MBH Capacity

For markets where steel boilers are prevalent, Burnham offers the RSA Series oil boiler to handle residential heating loads. The RSA is completely packaged, wired, and assembled for quick connection to water, fuel, and electrical service. This simplifies installations into new and replacement job sites.

Key Features:

Front Flange-Mounted Tankless Coil
Natural Draft
Oil-Fired
Water Only
Steel Package
Quick Release" Canopy Design
Equipped With Electric-Ignited Burner
Up to 84% AFUE

The Peerless Pinnacle high efficiency, Oil-fired condensing boiler offers 93%+ efficiency* and is ENERGY STAR® compliant. Two firing rates are available – .5 GPH and .6 GPH – with input ranges from 70,000 BTU/Hr. to 84,000 BTU/Hr. respectively.

The residential boiler is equipped with a Beckett AFG Burner, enabling the boiler to reach efficiencies well in excess of conventional boilers; both firing rates qualify for the ENERGY STAR rating. The heat exchanger is constructed of high alloy stainless steel that assures the boiler's durability and protects from erosion.

The direct vent, sealed combustion boiler offers many control features including multiple temperature set points for both heating and domestic hot water and outdoor reset capability. Test and diagnostic functions can be viewed on the LCD display.

• 93+% Efficient (for low temperature applications), ENERGY STAR® Compliant
• Condensing, Oil-Fired Boiler
• Direct Vent, Sealed Combustion
• Two Firing Rates Available
• Multi-Functional Controls
• Quiet Operation
• Slim Design/Small Footprint
• Designed, Tested and Stamped in Accordance with the ASME Boiler and Pressure Vessel Code

In cooperation with the U.S. Environmental Protection Agency and the Department of Energy, we are proud to offer residential oil boilers that meet or exceed efficiency standards for heating equipment. All PRO Series oil-fired boilers have earned the ENERGY STAR® with their high-efficiency ratings. Installing boilers with the ENERGY STAR rating is not only efficient and economical, but also environmentally friendly.

• Three Pass Boiler Design
• Packaged, Cast Iron, Oil Boiler
• Hot Water Boiler
• Lightweight Small Footprint
• High Efficiency, Quiet Flame Retention Burners
• Full Front Swing-Out Door
• ETL Design Certified

The Series WBV/WV residential, oil-fired boilers are available for use with both hot water and steam systems and designed for natural draft (chimney) venting. The fully-packaged or knockdown boilers are available in 3 sizes (3-5 sections) with 8 firing rates. Features of the Series WBV/WV boilers include a full plate swing-out door and convertible rear to top flue outlet (for 3 and 4 section boilers only). Honeywell operating controls, Taco circulators (water boilers) and probe type low water cut-off (steam boilers) are standard. A deluxe, insulated enameled steel jacket on all boilers reduces heat loss. The cast iron sections are assembled with steel push nipples and factory tested to assure a water tight seal.

High Efficiency, Flame Retention Burners

Peerless Series WBV/WV boilers are available with your choice of Beckett, Carlin or Riello burners. These burners feature a high voltage, solid state igniter that improves ignition, and a state of the art motor that results in a lower amp draw and cooler operation. Burners also include a solid state control with interrupted ignition, limited recycle and reset, a pre-purge and other features that assure dependable service. The combination of the advanced control and a solenoid oil valve results in cleaner and quieter burner operation.

• Packaged or Knockdown Oil Boilers
• Natural Draft Venting
• Flame Retention Burners
• Steam or Hot Water Boilers
• Optional Tankless Coils
• Rear or Top Flue Convertibility
• Skim Tapping for Cleaning Steam Boilers

The Series EC/ECT is a residential, oil-fired boiler for steam or hot water systems. Available as a packaged or knockdown unit, the Series EC/ECT is for use with natural draft (chimney) venting. The large water content of the boiler makes it ideal for steam and large volume hot water applications. Features include steel push nipples that provide a permanent water tight seal between sections, and a deluxe, insulated enameled steel jacket that reduces boiler heat loss. A full plate swing-out door on the Series EC/ECT allows for quick and easy boiler cleaning. Honeywell operating controls, a Taco circulator, and a float type low water cut-off on packaged steam boilers are all standard equipment on Series EC/ECT boilers.

• Large Water Volume
• Packaged or Knockdown Oil Boilers
• Natural Draft Venting
• Flame Retention Burners
• Steam or Hot Water Boilers
• Optional Tankless Coils
• Skim Tapping for Cleaning Steam Boilers

The Freeport ODV achieves very high efficiency by circulating the hot flue gases through the heat exchanger three times. Most other residential boilers are designed for only a single or double pass.

The Freeport ODV is designed to maximize heat transfer from flue gases to the boiler water, and to minimize the amount of cast iron and water that must be heated. Interior heat-transfer surfaces are smooth to provide clean combustion and to reduce the build-up of soot deposits. The result of these innovations is that your home gets warm faster and you get the greatest value from you heating dollar.

To maintain that efficiency over years of operation, the CROWN Freeport ODV boiler totally exposes all interior surfaces for service and cleaning through a swinging front door.

ODV Direct Vent System

Features of the ODV:

Oil-fired boilers for new and old homes with chimneys

CROWN's unique, three-pass Scotch Marine technology has been proven in more than 50 years of use in large commercial and industrial heating systems.

The Freeport CT achieves very high efficiency by circulating the hot flue gases through the heat exchanger three times. Most other residential boilers are designed for only a single or double pass.

The Freeport CT is designed to maximize heat transfer from flue gases to the boiler water, and to minimize the amount of cast iron and water that must be heated. Interior heat-transfer surfaces are smooth to provide clean combustion and to reduce the build-up of soot deposits. The result of these innovations is that your home gets warm faster and you get the greatest value from your heating dollar.

To maintain that efficiency over years of operation, the CROWN Freeport CT boiler totally exposes all interior surfaces for service and cleaning through a swinging front door.

Features of the CT:

The Kingston boiler provides hot water heat in a variety of sizes (78,000 to 235,000 heating capacity BTU/HR) to serve a wide range of homes. An approved chimney is required.

The boiler design is proven in service to be reliable. It is easy to maintain and economical in its purchase price and fuel consumption. The boiler can be ordered with flame retention Beckett, Carlin or Riello oil burners.

The boiler features a swing-open burner door that gives full access to the combustion chamber and burner nozzle. A split jacket provides easy access to the flue passages of the heat exchanger. The attractive and durable jacket is powder-coated to resist scratching and insulated to retain heat. The heat exchangers are constructed to meet the standards set by the American Society of Mechanical Engineers.

The Kingston has a wet base design in which the heat exchanger surrounds the combustion chamber on all sides to provide optimum heat transfer. The result is lower fuel costs.

On the Kingston steam boiler, the heat exchanger is assembled with steel push nipples below the water line where resistance to expansion and contraction is important, and cast iron push nipples above the water line where corrosion resistance is key. The cast iron push nipples are larger than usually found on such units to provide optimum steam quality.

Kingston…the latest in a series of designs that is constructed for long life, convenient to install and service, and designed to provide the most value for each energy dollar. That's CROWN's commitment to quality.

Special features of the Kingston:

The Tobago boiler provides hot water heat in a variety of sizes (from 80,000 to 238,000 heating capacity BTU/HR) to serve a wide range of homes. An approved chimney is required.

The boiler design is proven in service to be reliable. It is easy to maintain and economical in its purchase price and fuel consumption. The boiler can be ordered with flame retention Beckett, Carlin or Riello oil burners.

The boiler features a swing-open burner door that gives full access to the combustion chamber and burner nozzle. A split jacket provides easy access to the flue passages of the heat exchanger. The attractive and durable jacket is powder-coated to resist scratching and insulated to retain heat. The heat exchangers are constructed to meet the standards set by the American Society of Mechanical Engineers.

The Tobago has a wet base design in which the heat exchanger surrounds the combustion chamber on all sides to provide optimum heat transfer. The result is lower fuel costs.

Tobago…the latest in a series of designs that is constructed for long life and designed to provide the most value for each energy dollar. That's CROWN's commitment to quality.

Features of the Tobago: