Boilers

Alpine™ gas-fired, condensing stainless steel boiler

Safe, reliable, and efficient that's the Alpine boiler, NEW from Burnham! The Alpine is a fully modulating condensing gas boiler with a 95% AFUE. At the heart of the Alpine is a durable, high efficiency stainless steel heat exchanger. Water flows through a series of stainless steel coils that completely surround and capture the heat from the combustion chamber. This design ensures maximum heat transfer at all times and the ability to condense, which further enhances efficiency. Complete modulation of firing rates ensures that the boiler will only operate as much as it needs to in order to answer the call for heat. The new Alpine it's the peak of efficiency, safety, and reliability... only from Burnham Hydronics!

With PVC Venting!

• Up to 95% AFUE - ENERGY STAR® Certified
• Stainless steel heat exchanger
  
• Easy to install and maintain
  
• Six sizes; 80,105, 210, 285, and 399 MBH
  
• Natural gas or propane
  
• Sleek appliance-like design
  
• Stackable (for multiple boiler applications)
  
• Fully modulating operating control with outdoor reset

Burnham's Freedom CM boilers are high efficiency condensing boilers with AFUEs up to 95+%. The Freedom CM offers a sleek appearance on the outside and a cast aluminum monoblock heat exchanger on the inside. This design allows the Freedom to be hung on a wall which conserves valuable floor space, and provides an attractive appearance which makes it look quite good doing so. An optional base is available to convert the Freedom to a floor-standing configuration.

Freedom CM boilers are available for either natural gas or propane installations. These boilers are designed for use with state-of-the-art polypropylene concentric venting that is included with every Freedom CM boiler. The Freedom CM comes in three sizes and operates with a fully modulating digital control system. The control system continuously monitors and optimizes boiler operation for maximum efficiency and comfort, and comes standard on every Freedom CM model. The Freedom CM boiler also comes with a standard indoor/outdoor reset.

• Up to 95% AFUE - ENERGY STAR® Certified
  
• Cast Aluminum Mono Block Design
  
• Easily Installed Polypropylene Concentric Venting (Included with Boiler)
  
• Three Sizes 70, 90 & 120 MBH
  
• Natural Gas or Propane
  
• Space Saving wall-hung Mounting Configuration
  
• Fully Modulating Operating Control with Outdoor Reset

Today’s lifestyles have created ever increasing demands for abundant supplies of comfortable space heating including radiant heat, domestic hot water, and snow melting to keep walks and driveways clear – all with the best possible efficiencies available. A condensing boiler can help ensure that all of these needs are met.Burnham now offers the best solution for these demanding needs with a ruggedly designed, cast aluminum, condensing boiler that has efficiency ratings exceeding 94+%.

Some of the many features include:

• Up to 94% AFUE - ENERGY STAR® Certified
• Quiet Operation
  
• Cast Aluminum Heat Exchanger
  
• Water Only Boiler
  
• Natural Gas or Propane
  
• Fully Modulating Firing Rates
  
• LowNOx and CO Ratings
  
• Direct Vent Sealed Combustion
  
• 150 - 225 MBH (2 Sizes)

As one of Burnham's most efficient gas-fired boiler (up to 88% A.F.U.E.), the Revolution is unmatched in versatility. Available in five sizes, the Revolution is easily combined with an indirect water heater and zoning controls for total home comfort. And because of the variety of venting options, the Revolution is adaptable to the floorplan of virtually any home.

Consider these features:

• Familiar and proven gas train and controls.
  
• Ideal for radiant systems.
  
• Supply temperatures anywhere from 55 to 200 without worry of damage from condensation.
  
• A built-in primary/secondary loop makes it is easy to connect to low temperature systems.
  
• All connections from top to allow for minimal clearances.

Key features:

• Honeywell Smartvalve Hot Surface to Pilot Ignition
  
• Multiple Venting Options
  
• Built in Injection Pump with Tekmar Injection Controller
  
• Installed Primary/Secondary Water Manifold
  
• Natural or LP Gas
  
• Water Only
  
• Cast-Iron Sectional Design
  
• 62 To 190 MBH Capacity
  

Model SCG™ gas water boiler

Your Cost Saving Alternative 

SCG - Sealed Combustion Gas Boiler
PVG - Power Vent Gas Boiler  

Whether your replacing an old inefficient boiler or you live in a house without an adequate chimney, the Burnham Hydronics SCG or PVG boiler is the right heating equipment for your home.

A newly engineered cast iron heat exchanger is the heart of the system. It incorporates more heating surface and directional flow technology allowing the boiler to reach 85% + AFUE — ultimately saving energy and improving your family’s payback.

Model PVG™ gas water boiler

• Step Opening Gas Valve
  
• Stainless Steel Burners
  
• Natural Draft
  
• Concealed Gas Valve and Controls
  
• Natural or LP Gas
  
• Combustible Floor Certified
  
• Water Only
  
• Cast-Iron Sectional Design
  
• 31 To 244 MBH Capacity

• Natural Draft
  
• Natural or LP Gas
  
• Water or Steam
  
• Cast-Iron Sectional Design
  
• 51 To 317 MBH Capacity

• Induced Draft
  
• Natural Gas
  
• Steam
  
• Cast-Iron Sectional Design
  
• 51 To 145 MBH Capacity

• Direct Vent
  
• Natural or LP Gas
  
• Water Only
  
• Cast Iron Sectional Design
  
• Space and Domestic Water Heating

• Gas fired water boiler with cast aluminum heat exchanger
• Venturi mixing body mixes air and gas providing higher efficiency
• Designed to operate in low temperature condensing applications
• Outdoor reset and domestic hot water priority standard
• Negative regulated gas valve precisely delivers gas to the boiler
• U-Control gives you the power for easy set-up and maintenance
• Modulates with 5 to 1 turn-down ratio
• Variable speed motor matches combustion output to heating needs
• High grade stainless steel burner features quiet operation, high efficiency, and cleaner combustion for low NOx applications

• Gas fired water boiler with cast aluminum heat exchanger
• Venturi mixing body mixes air and gas providing higher efficiency
• Designed to operate in low temperature condensing applications
• Outdoor reset and domestic hot water priority standard
• Negative regulated gas valve precisely delivers gas to the boiler
• Electronic control module automatically adjusts blower speed and gas flow rate in response to environment
• Modulates with 5 to 1 turndown ratio
• Variable speed motor matches combustion output to heating needs
• High grade stainless steel burner features quiet operation, high efficiency, and cleaner combustion for low NOx applications

• Gas-fired direct vent water boiler with cast iron sections
• Uses sealed combustion technology which reduces energy usage by eliminating air infiltration
• Control module and ignition control with mistake-proof wiring and diagnostic indicator lights
• On-board pictorial wiring diagrams and troubleshooting guide
• Fast power hookup with external J-box and pre-stripped wires
• Low NOx Certified by South Coast Air Quality Management District (Rule 1146.2) in California
• Easily accessible components, and fewer parts for quick and easy servicing
• Energy Star Rating
• Simple propane conversion

• Gas fired water boiler with cast iron sections
• Direct vent capability
• Can be used with natural or propane gas
• All units are factory-tested, and include a limited lifetime warranty on cast iron sections
• Compact design saves valuable living space
• No vertical draft hood and no mechanical vent damper
• Intermittent electronic ignition with standard components for easy servicing

• Uses sealed combustion technology which reduces energy usage by eliminating air infiltration
• Compact design saves valuable living space
• Control module and ignition control with mistake-proof wiring and diagnostic indicator lights
• Uses stainless steel burners for quieter ignition, longer life, and improved combustion.
• Easily accessible controls, vertical flueways and top cleaning for easy and quick servicing
• Gas fired water boiler with cast iron sections

• The CGt is available in one size and has a built-in tankless heater as standard equipment.
• The CGt gas boiler from Weil-McLain offers a compact design boiler that also provides domestic hot water.
• Other features include high-grade stainless steel burners, integrated control module and venting flexibility.

• Control module and ignition control with mistake-proof wiring and diagnostic indicator lights
• Compact design saves valuable living space
• Stainless steel burners for quieter ignition, longer life, and improved combustion
• Gas fired water boiler with cast iron sections
• Easily accessible controls, vertical flueways and top cleaning for easy and quick servicing

• Comes with automatic vent damper for higher efficiencies and reduced fuel consumption
• Easy access to controls for convenient servicing
• Available with standing pilot or intermittent electronic ignition
• A versatile gas cast iron boiler for water or steam applications

• 95.85% AFUE
• Gas-Fired Condensing Boiler
• Fully Modulating Burner
• Factory Tested, Pre-Mixed Gas Burner Technology
• ASME and ETL Certified for U.S. and Canada
• State of the Art Control Board

• New P825 Control Board
• 95% AFUE
• Natural or LP Gas
• Direct Vent
• Compact, Light-Weight Design
• Pre-Mixed Burner Technology
• Quiet Operation
• Meets the Requirements of the ASME Boiler and Pressure Vessel Code

• Packaged Residential Hot Water Boilers
• Natural or LP Gas
• Natural Draft Venting
• Standing Pilot or Intermittent Ignition
• Low Profile Design

• Packaged Residential Hot Water Boilers
• Natural Gas
• Natural Draft Venting
• Intermittent Ignition
• Low Profile Design

• Packaged Residential Hot Water Boilers
• Natural or LP Gas
• Direct Exhaust or Chimney Venting
• Intermittent Ignition

• Packaged Residential Hot Water Boilers
• Natural or LP Gas
• Sealed Combustion, Direct Vent
• Intermittent Ignition
• Unique Wall Thimble

SERIES 63

• Packaged or Knockdown Residential Gas Boilers
• Natural or LP Gas
• Natural Draft (Chimney) Venting
• Electrically Operated Vent Damper
• Large Water Content
• Low Profile Design
• Standing Pilot or Spark Ignition
• Steam or Hot Water Boilers
• Skim Tapping for Cleaning Steam Boilers

Aruba 3

ARUBA 3 is CROWN's best selling gas-fired, hot water boiler. It comes in a wide range of sizes from 37,000 to 295,000 BTU/HR input.

Crafted with a rugged, cast iron heat exchanger and stainless steel burners that are both backed by a lifetime limited warranty, the ARUBA 3 offers proven-in-service reliability, simplicity of design and economy in its purchase price and consumption of fuel.

The ARUBA 3 is available with standing pilot or electronic ignition for greater energy efficiency. Honeywell controls provide reliability, ease and convenience.

Attractive and durable, the two-tone, powder-coated jacket resists scratching. Plus, it's insulated to retain heat. The ARUBA 3 meets all national standards, and the heat exchanger meets the specifications of the American Society of Mechanical Engineers.

ARUBA 3 is the latest in a series of designs that CROWN engineers have created for ease of use, constructed for long life and engineered to provide the most value for each energy dollar. That's CROWN's commitment to quality.

Bali gas-fired, hot water boilers from CROWN meet the challenge of providing higher efficiency than many standard boilers for homes where the chimney cannot be used.

An integral draft fan system designed into the Bali permits venting directly through a wall. Rugged cast iron heat exchanger and stainless steel burners are backed by a lifetime limited warranty, and the simplicity of design and reliability ensures years of low maintenance operation.

The Bali is available in six sizes (from 61,000 to 229,000 BTU input) to serve both small and large homes and businesses. The attractive and durable two-tone, powder coated jacket encloses most of the controls and wiring for a sleeker appearance, and it can be installed on any non-carpeted combustible surface. The Bali meets all national standards, and the heat exchanger meets the specifications of the American Society of Mechanical Engineers.

The Bali is among a new series of designs that CROWN engineers have created for ease of use, constructed for long life and engineered to provide the most value for each energy dollar. That's CROWN's commitment to quality.

• Energy star qualified: efficiency exceeds 85% A.F.U.E.
• Proven reliability: designed with the benefit of CROWN’s years of experience, employing technology proven in service, with the newest in controls to optimize operation
• Powered intake and venting saves energy dollars by using combustion air from outside, rather than room air you’ve already paid to heat, and assures that all gases go directly outside
• Boiler system controller provides two zones, with ability to prioritize the zone connected to a Mega-Stor indirect water heater; plug-in outdoor temperature reset control is an optional feature
• Self diagnostics with LED indicators show status of boiler operation. Boiler may be ordered without this control system.
• Sensors monitor continuing operation of the venting system
• Spark-to-pilot ignition saves fuel. Step-opening gas valve provides smoother ignition
• Sealed combustion: isolates the combustion in your boiler from the air in your home
• Stainless steel burners give quiet, trouble-free operation
• Lifetime Limited Warranty on the heat exchanger
  (see warranty for details)
• Multiple venting options: through-wall venting for applications where there is no chimney or where existing chimney is old and in need of expensive repairs; horizontal or vertical installation to suit most locations
• Clean look with controls located in a front vestibule for ease of service and flexibility in installing the unit in tight spaces
• Advanced safety systems: designed to assure clean, safe combustion; reduces the possibility of carbon monoxide buildup
• Designed, tested and certified to meet the industry's most rigorous standards of quality, safety and efficiency
• Easy to install: completely factory assembled, wired and tested
• Cast iron, wet-leg heat exchanger provides efficient heat transfer and reliability over a long life
• Multiple location options: can be installed on combustible floors and, with its compact design and wet-leg construction, can also be installed in closets or small areas
• Sized to fit your needs: seven sizes from 60,000 to 245,000 BTU/HR input accommodate all sizes of homes and businesses

• The CAYMAN is the newest in gas-fired hot water boilers from Crown and is available in a wide range of sizes from 69,000 to 379,000 BTU/HR input.
  
• CAYMAN has all of the features that Crown customers have come to love in the ARUBA3 series and more, including higher AFUE’s, an optional tankless coil for domestic hot water (see specifications) and a larger range of available sizes.
  
• Crafted with a rugged, cast iron heat exchanger and stainless steel burners that are both backed by a lifetime limited warranty, the CAYMAN offers proven-in-service reliability, simplicity of design and economy in its purchase price and consumption of fuel.
  
• The CAYMAN is available with standing pilot or electronic ignition for greater energy efficiency. Honeywell controls provide reliability, ease and convenience.
  
• Attractive and durable, the two-tone, powder-coated jacket resists scratching. Plus, it’s insulated to retain heat. The CAYMAN meets all national standards, and the heat exchanger meets the specifications of the American Society of Mechanical Engineers.
  
• CAYMAN is the latest in a series of designs that CROWN engineers have created for ease of use, constructed for long life and engineered to provide the most value for each energy dollar. That’s CROWN’s commitment to quality.
  

• BIMINI features low-mass, cast aluminum heat exchangers which transfer heat more efficiently. Aluminum provides superior corrosion resistance, which is important on condensing boilers.
  
• Aluminum can be cast into intricate designs that improve heat transfer efficiency. Flow paths on both the combustion side and the water side are engineered to optimize efficiency.
  
• Why a condensing boiler
  Condensing design is necessary in a very high efficiency boiler. When the boiler is operating at maximum efficiency the exhaust temperatures become so low that water vapor in the exhaust condenses. The boiler has to be designed to drain away this liquid.
  
• BIMINI is available in nine sizes with inputs ranging from 70 to 425 MBH.
• BIMINI uses less floor space than other similarly sized boilers, and the smaller sizes can be hung on the wall.
  
• BIMINI is lighter in weight than conventional boilers.
  
• The BIMINI is designed for easy installation. Water and gas piping are conveniently located, and electrical components are pre-wired and terminals are provided for quick and easy field wiring.
  

The Maui is a wall mounted boiler available in a “heat only” or “combi” model.

Its compact design and ability to deliver both heat and hot water from the same unit (when the combi model is installed) make it ideal for applications where space is at a premium.